Greenlee TG-2000 Manuel D'instructions page 5

Important Safety Information
Electric shock hazard:
• Do not attempt to repair this unit. It contains no user-serviceable parts.
• Do not expose the unit to extremes in temperature or high humidity. Refer to "Specifications."
Failure to observe these precautions may result in injury and can damage the unit.
• Temperature readings will be inaccurate on highly reflective objects.
• Temperature readings will be inaccurate on objects if emissivity is not adjusted properly.
Follow masking and emissivity adjustment procedures.
• Allow 30 minutes for the unit to adjust to large changes in ambient temperature;
inaccurate readings can result.
• Clean lens periodically; inaccurate readings can result. Refer to the "Maintenance" section.
Failure to observe these precautions may result in injury and can damage the unit.
• Using this unit near equipment that generates electromagnetic interference can result in unstable
or inaccurate readings.
• Protect the unit against static electricity.
Burn hazard:
• Avoid contact with the probe until it has cooled. The thermocouple probe may
remain hot for several minutes after making a temperature measurement.
• Do not exceed the temperature rating of the thermocouple probe. Consult the
manufacturer's specifications for the selected probe.
Failure to observe these precautions may result in injury and can damage the
unit.
TG-2000
5