Latch (Lower Anchors & Tether) Option - SafeGuard Base XChange Seat Manuel D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

LATCH (Lower Anchors & Tether) Option
For Use with Add-On Child Seats
WARNING! DEATH or SERIOUS INJURY can occur:
• Follow all instructions on the child restraint and in this manual. Failure to follow the
manufacturer's warnings for proper use of the child restraint system and LATCH attachments can
result in serious injury or death.
Location and Use of Lower LATCH Anchors
Some SafeGuard Bus Seats are equipped with lower LATCH
anchors for the attachment of add-on child seats. The lower
LATCH anchors (if available) are located in the lower portion
of the back seat cushion.
with lap-shoulder belts and/or integrated child seats will have
LATCH anchor locations identified with the anchorage symbol
just above the anchor.
A1
Adding LATCH Anchors
Base XChange Seats may be fitted with LATCH anchors if
not originally equipped. Contact your OEM Bus Dealer or
SafeGuard for further information on ordering LATCH anchors.
If LATCH anchors are required to be added to XChange seats
originally equipped with either lap-shoulder belt or integrated
child seat options, the entire SmartFrame module must be
exchanged.Contact your OEM Bus Dealer or SafeGuard for
further information on ordering inner module assemblies
equipped with LATCH anchors.
Location and Use of Tether Anchors
All SafeGuard XChange Bus Seats are equipped with tether
anchors for add-on child seats. Tether anchors are located on
the aisle side rear pedestal and on the seat wall mount bracket
rear edge.
B
Installing Tether
To attach an add-on child seat tether, route the tether on the
child seat over the top of the SafeGuard Bus Seat.
the tether and connect the snap hook to the nearest tether
anchor provision at the lower rear of the seat.
tether to a snug and tight fit by pulling on the free end of the
strap at the adjuster.
XChange Seat versions equipped
A
D
C
Extend
D
Adjust the
8
A1
Lower LATCH
Anchors
A
B
Child Seat
Tether
C
D
Tether
Anchor
LATCH
Anchor
Pull to
tighten
Tether
Anchor

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Xchange flexseatXchange two-beltXchange integrated child seat

Table des Matières