Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
TECHNICAL DATA
Type
CDH18LD.Z (CDH-designation of machinery, representative of rotary hammer)
Voltage
Charger input
Charger output
Charger model
Battery pack model
No. Of battery cells
Battery capacity
Charging time
No load speed
Impact rate
Max. Drilling capacity
Steel
Wood
Masonry
Machine weight
NOISE AND VIBRATION DATA
A weighted sound pressure
K
pA
A weighted sound power
K
wA
Wear ear protection when sound pressure is over
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745:
Mode description
Hammer drilling into concrete
WARNING: The vibration emission value during actual use of the power tool can differ from
the declared value depending on the ways in which the tool is used dependant on the following
examples and other variations on how the tool is used:
How the tool is used and the materials being drilled.
The tool being in good condition and well maintained.
Using the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
Note:
- that the declared vibration total value has been measured in accordance with a standard test method
and may be used for comparing one tool with another;
- that the declared vibration total value may also be used in a preliminary assessment of exposure.
Warning:
- that the vibration emission during actual use of the power tool can differ from the declared total value
90
Vibration emission value
a
= 11,82m/s
2
h,HD
100-240V~50/60Hz,42W
10.8--20V
ACG1815D
ABP1820SD
2.0Ah Li-Ion
0-850/min
0-4800 bpm
L
pA
L
wA
80dB(A)
Uncertainty K
K = 1.5m/s²
18V
1500mA
5
80min
8mm
10mm
10mm
2.1kg
86dB(A)
3dB(A)
97dB(A)
3dB(A)
Publicité
Table des Matières
