Performing A Blood Glucose Test - Fora Diamond VOICE Manuel De L'utilisateur

Performing a Blood Glucose Test

You will need:
Meter
1
2. Select the appropriate measuring mode by pressing Main button
For selecting the measurement mode, please refer to the "FOUR
MEASURING MODES".
Test Strip
2
Lancing Device
3
1. Insert the test strip to turn on the
meter
Wait for the meter to display "
" ".
Voice Guide
Thank you for using this product. Please
relax during the measurement. Please
apply blood onto the test strip.
3. Obtaining a blood sample
Use the pre-set lancing device to
puncture the desired site. Wipe off the
first appeared drop of blood with a clean
cotton swab. The size of the drop should
be at least as big as (actual size), which
is 0.5 microliter ( μ L) of volume. Gently
squeeze the punctured area to obtain
Lancet
4
" and
21