Fora Diamond VOICE Manuel De L'utilisateur page 12

3. Setting the time
With the hour flashing, press Main button
until the correct hour appears. Press SET.
With the minute flashing, press Main
button until the correct minute appears.
Press SET.
4. Deleting the memory
With "dEL" and a flashing " " on the
display, press Main button and select "no"
to keep the results in memory then press
SET to skip.
To delete all the results, press Main
button and "yes" and " " are displayed
on the meter, press SET to delete the
memory.
5. Setting the speaking volume
There are seven (7) speaking volume
options to choose from. Press Main
button until the desired speaking volume
appears. To confirm your selection, press
SET.
Volume 0 indicates that the speaking
function is turned off, and " " will not
display during testing. Volume 1 to 7
indicates speaking volume from low to
10