Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
EN
The FC-T wired timer controller allows you to automatically trigger fog output by setting interval
and duration times. LED indicator lights display the machine and controller's current state. Rotary
knobs set interval and duration times, while manual and continuous buttons allow overriding control.
Instructions
5200 N.W. 108th Ave., Sunrise, FL 33351 U.S.A. (800) 762-1084 – (954) 577-4455 FAX (954) 929-5560
FC-T Wired Timer Controller
1. Plug in the fog machine to power and turn the power switch to the product
on.
2. Plug in the timer controller to the Manual Controller socket on the back of
the fog machine.
3. Press the <TIMER ON/OFF> latching button on the timer controller. The
Timer LED Indicator above the button will light up. The <TIMER
ON/OFF> latching button will remain on until it is pressed again.
4. Set the INTERVAL, DURATION, and OUTPUT adjustment knobs to the
desired positions.
·
INTERVAL knob sets the amount of time in between bursts of fog
·
DURATION knob sets the length of time that the fog machine will
run during the burst
·
OUTPUT knob adjusts the fog output
5. Press the <CONTINUOUS> latching button and the fog machine outputs
fog until the button is pressed again. The Manual/Power LED Indicator
above the button will light up during continuous operation.
Note: The duration of continuous fog output is based on the capability of
the fog machine.
6. Press the <MANUAL> button to momentarily output fog. The fog machine
will output fog for as long as you hold down the button. During manual
operation the Manual Momentary LED Indicator above the button will light
up.
Note: The duration of manual fog output is based on the capability of the
fog machine.
Interval
Adjustment
Output
Adjustment
Timer LED
Indicator
Manual/Power
LED
Indicator
Timer On/Off
Latching
Button
Note: The output knob will not function on older fogger products
(e.g., Hurricane 901, Hurricane 1100, Hurricane 1101, Hurricane 1300,
Hurricane 1301, and the Hurricane 1800 Flex)
Duration
Adjustment
Manual
Momentary
LED
Manual Control
Momentary
Button
Continuous
Latching Button
www.chauvetlighting.com
Publicité
Manuels Connexes pour Chauvet DJ FC-T
Sommaire des Matières pour Chauvet DJ FC-T
- Page 1 FC-T Wired Timer Controller The FC-T wired timer controller allows you to automatically trigger fog output by setting interval and duration times. LED indicator lights display the machine and controller’s current state. Rotary knobs set interval and duration times, while manual and continuous buttons allow overriding control.
- Page 2 Controlador de Temporización con cable FC-T El controlador de temporización con cable FC-T le permite lanzar humo automáticamente ajustando los intervalos y tiempos de duración. Las luces del indicador LED muestran el estado actual de la máquina y del controlador. Los mandos giratorios ajustan los tiempos de intervalo y duración, mientras que los botones Manual y Continuo permiten...
- Page 3 Commande câblée à minuterie FC-T La commande câblée à minuterie FC-T vous permet de déclencher automatiquement des jets de brouillard par programmation d'intervalles et de durées. Les voyants LED affichent le statut actuel de la commande et de la machine. Les molettes permettent de définir des intervalles et des durées, tandis que les boutons, manuels et statiques, permettent de reprendre le contrôle.
- Page 4 FC-T Bedrade timerbediener De FC-T bedrade timerbediener laat u de neveluitstoot automatisch activeren door het interval en de tijdsduur in te stellen. LED-lampjes geven de huidige toestand van de machine en de bediening aan Met de draaiknoppen worden de interval en tijdsduur ingesteld, terwijl de handmatige en continue knoppen de bediening kunnen overnemen.