Publicité
Les langues disponibles
Les langues disponibles
Notes
Only the radio remote control with the article number FU5150 has a
panic alarm function. This function is automatically learned into the
panel and does not need to be learned in separately.
The panic alarm is activated when you press the buttons 1 and 4
(see fig 1.) simultaneously.
Read the manual of the alarm panel for the individual programming
of the buttons.
Changing the battery
Open the housing, by removing the screw at the bottom side.
Remove the empty battery and replace it by the same type of battery
(CR 2032, Li-Mn 3V). Remount the bottom side and screw the
housing.
1
Button 1: Full arming
2
Button 2: Home arming
3
Button 3: not used
4
Button 4: Disarm
5
Panic alarm
6
LED
Publicité
