Heaven Fresh XJ-2100UV Mode D'emploi page 3

All manuals and user guides at all-guides.com
2. For individuals who have chronic respiratory problems, we recommend that the XJ-2100UV be set at low at night time,
if the ionizer is in the bedroom, since respiratory activities differ in sleep.
Vehicle Placement Instructions:
Either place in the middle console or passenger seat, or attach to the dashboard using the adhesive
pads which are included in the box. Do not place in the back seat or rear window.
If Ozone Odour Becomes Too Strong
The XJ-2100UV produces ozone only as a byproduct of the needlepoint ionization, creating only
moderate and safe levels. Although it is not common, the odour of ozone can potentially become
uncomfortably strong for certain individuals, and/or in certain environments. The Heaven Fresh air
purifier is not capable of producing harmful ozone levels in spaces of 100 sq. ft. or more. Depend-
ing on the size of the room, and the ventilation, it will produce about 0.015 to 0.04 ppm (parts per
million) of ozone, which is well within FDA and OSHA standards. In smaller spaces, you will prob-
ably not want to run the unit continuously. The best way to remedy a strong ozone odour is to
somehow increase air flow near or around the unit, or place it in a more open area, where there is
a better air current. Examples can include turning on a ceiling fan, temporarily opening a window,
and opening the door to the room. It may become necessary to run the unit on low, or move the
unit to another location periodically, since the space may be small enough (and not polluted
enough) that it does not require the continuous use of the unit.
Maintenance
(Make Sure Unit is Unplugged Before Performing Any Maintenance!)
Please contact Heaven Fresh customer support at 0800-952-9962 (www.heavenfresh.co.uk)
if you have any questions regarding the use of this product.
1. Cleaning the Dust Collection Plates:
The dust collection plates should be cleaned about every 20-30 days, or when covered with dirt and
residue. If the purifier begins making a zapping sound, then this is simply a sign that the
dust collection plates needs to be wiped off. The zapping sound is just a result of a significant
amount of dust build-up on the collection plates. Cleaning the dust collection plates is very simple.
First, twist the knob on the right hand side of the air purifier and pull the plates out. Second, wipe
the plates off with a damp cloth. If there is difficult-to-remove residue on the plate, you should
use a mild household cleaner, such as detergent, to help remove it. Third, dry the plates.
Fourth, reinsert the plates back into the air purifier. Twist the handle to lock them in place and so
that the unit will operate again. Please refer to the lock and unlock symbols on the handle of dust
collection plate.
1. Removing the dust collection plates. 2. Wiping dust collection plates clean.
3