AneX m/type PRO Manuel D'entretien page 10

EN
possible. Please note that otherwise, the
product can stop functioning — either partially
or fully.
The cleaning of the stroller's coating can
be done with the help of a wet washcloth or
brush with detergent. There is no need to take
the coating off while cleaning. The color of
materials and textile can fade after the stroller
has been exposed to sunlight for a long time.
10
From time to time remove the wheels from
the chassis and brush off any dirt or sand that
might have got on the axle of the wheel. Do not
immerse the wheel bearings into the water. Use
a brush and water to clean the wheels from dirt.
The wear level of wheels must be controlled,
and the wheels should be cleaned from dirt on
the regular basis. Besides that, there are 8 ball
bearings in the stroller (2 per each wheel), which
should be regularly greased and protected
from dirt and liquids. In case such substances
get inside, the ball bearings should be cleaned,
dried and greased with several oil drops. Any
spillage of oil should be wiped with a dry cloth.