Spdif Output; Setting The Time; Setup Menu; Using The Sleep Timer - Samsung 6 Serie Mode D'emploi

Basic Features

sPDIF Output

SPDIF (Sony Philips Digital Interface) is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as a DVD player.
Audio Format : During the reception of a digital TV
■
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
✎
By connecting to 5.1ch speakers in a dolby
digital setup, maximize your interactive 3D sound
experience.
Audio Delay : Correct audio-video mismatch, when
■
watching TV or video, and listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
sound Reset (On / Off)
Reset all sound settings to the factory defaults.

Setup Menu

setting the Time

¦
O
m → setup → Time → EnTERE
MEnU
Time
✎
The current time will appear every time you press the
InFO button.
Clock : Setting the clock is for using various timer
■
features of the TV.
✎
If you disconnect the power cord, you have to set
the clock again.
Clock Mode: Set up the current time manually or
automatically.
– Auto : Set the current time automatically using the
time from a digital channel.
✎
The antenna must be connected in order to set
the time automatically.
: Set the current time manually.
– Manual
✎
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
Clock set: Set the Month, Day, Year, hour, Minute
and am/pm.
✎
Available only when
Manual.
✎
You can set the month, day, year, hour and minute
directly by pressing the number buttons on the
remote control.
18
English
Clock Mode is set to
DsT (Off / On): Switches the DST(Daylight Saving Time)
function on or off.
✎
This function is only available when the
Mode is set to Auto.
Time Zone: Select your time zone.
✎
This function is only available when the
Mode is set to Auto.

Using the sleep Timer

¦
O
m → setup → Time → sleep Timer →
MEnU
EnTERE
t
sleep Timer
■
shuts off the TV after a preset period
of time. (30, 60, 90, 120, 150 and 180
minutes).
✎
To cancel the sleep Timer, select
Off.

setting the On/Off Timer

¦
O
m → setup → Time → Timer 1 →
MEnU
EnTERE
Timer 1 / Timer 2 / Timer 3
■
timer settings can be made. You must set the clock first.
Timer 1
On Time
▲
Inactivate 12
▼
Off Time
Inactivate 12
Volume Source
10 TV
Repeat
Sun Mon
Once
L Move U Adjust E Enter R Return
On Time / Off Time: Set the hour, minute, am/pm and
activate/inactivate. (To activate the timer with the setting
you have chosen, set to Activate.)
Volume: Set the desired volume level.
source: Select TV or UsB content to be played when
the TV is turned on automatically. (UsB can be selected
only when a USB device is connected to the TV)
Antenna (when the source is set to TV): Select Air or
Cable.
POWER
P Clock
Clock
: Automatically
SLEEP
FAV.CH
: Three different on / off
00 am
S.MODE
00 am
Antenna Channel
Air 3
Tue Wed Thu Fri Sat
TOOLS