Celestron TRAILSEEKER Mode D'emploi page 6

QUick release plate
The quick release plate allows you to quickly
attach your optics to the tripod. To remove the
Quick Release Plate
quick release plate from the fluid pan head,
push the lock lever to the left until it locks.
Lock Lever
Attach the quick release plate to any device or
optic with a ¼"-20 mount thread by placing the
front of the quick release plate into the head.
Next, slide the plate into place. When the plate
is fully seated, press down. The lock lever will
Fig. 3
automatically lock the plate into place.
I ENGLISH
4