Operating The Device - vigo TURBO EMI 750 Mode D'emploi

Power Button
Temperature Increasing Button (+)
Temperature Reducing Button (-)
Operating at Maximum Power
(4 hours) (Turbo Timer)

Operating the Device

Put the plug into the grounded socket. Your device will turn on. When the device is
on, you will see the stand-by light on the Dashboard. Stand-by light indicates that the
device receives electricity.
In order to operate the device, you should press the POWER button on the remote
control, or on/off button on the device. When you press POWER button and on/off
button, the device will start to operate at the 1st level, and 1st level light will light up
on the Dashboard.
Reducing and Increasing the Temperature
When you want to increase or reduce the temperature, you can select the level you
want by pressing the related button (+) to increase, (-) to reduce) on the remote control.
When you want to operate the device at maximum power, you can use the Continuous
Operating at Maximum Power (Turbo Timer) button on the Remote Control, or move to
the 2nd level. Presence-detecting system is disabled for 4 hours following the pressing
of Turbo Timer button.
Presence Detecting
Many users forget to turn off the device at the end of the day, or waste energy since
they don't stay at the same place during the day. Presence detecting system is operated
automatically with the pressure put on the upper surface of the device. When the device
is operated at 1st and 2nd levels, if it does not sense any presence for 10 minutes (if the
22