vigo TURBO EMI 750 Mode D'emploi page 21

Turbo Foot Warmer Dashboard
When the warmer is plugged in, standby light will light up.
This is the light, which indicates that the warmer is operating at the
1st level (at 1/4 power).
This is the light, which indicates that the warmer is operating
at the 2nd level (at 2/4 power).
This is the light, which indicates that the warmer is operating at the
3rd level (at 3/4).
This is the light, which indicates that the warmer is operating at the
4rd level (at 4/4, maximum power).
This is the On/Off button.
Turbo Foot Warmer consumes 750-Watt energy when it is operated at maximum
power. If the surface temperature of the device exceeds 60ºC, the power level
will gradually decrease. Warming level of the device can vary due to its energy
consumption level based on the conditions of the external environment. The
device runs to keep the surface temperature constant at the selected level.
NOTE: The above power values apply to 220 Volt.
21
2. OPERATING INSTRUCTIONS
EN