Unitekno C500A Manuel D'utilisation Et D'entretien page 13

MACHINE PARTS AND CONTROLS
> Steam/suction cleaning kit
STEAM/SUCTION HANDLE UNIT
21
The unit consists of a connector, a flexible tube and a
handgrip. The connector is inserted in the suction/steam
socket (4). To remove it, press the external clips (D). The
handle contains the on/off button for the motor (A) and the
steam trigger (B). The various cleaning accessories can be
attached to the handle at the provided bayonet base. To
remove them, simply pull them off the ring. The handle also
has a steam blocking switch (C). When this switch is on,
steam cannot pass.
EXTENSION TUBES
22
The extension tubes are connected to the handle and can
be attached to the various cleaning accessories. They have
different lengths to guarantee maximum practicality in
their different uses.
FLOOR BRUSH
23
The floor brush attaches to the handle or extension tubes.
It consists of a central H-shaped body, a vertical joint
controlled by a button (E), a horizontal joint with a locking
button (F), and two clips mounted on slides (G).
The H-shaped body is two-piece. It features a steam outlet
piece with a row of bristles and a suction intake piece.
Press the button (E), to rotate the head 180° on a vertical
axis and place the suction piece or the steam outlet piece
in the forward position. Press the locking button (F) (pushing
forward) to rotate the floor brush connector on a horizontal
axis. The slides on which the clips are mounted can be
lowered (outside position) or raised (inside position).
24 FABRIC BRUSH
The fabric brush can be attached to the handle or the
extension tubes. It consists of a central body and a moveable
plate containing a brush. It is equipped with a joint that can
be moved by pressing the button (F).
NOZZLE
25
The nozzle can be connected to the handle or the extension
tubes. It consists of the main body, which contains the
steam outlet, and a moveable suction opening. By moving
the suction opening to the back position, you can attach the
round brushes to the nozzle.
26 ROUND BRUSHES
Round brushes can be inserted into the nozzle steam outlet
by using a little pressure. To remove them, simply pull them
out.
27 TRANSPARENT NOZZLE
It is connected to the same support as the water-jet pipe
and may be used with the brush.
12
GLASS WIPER
28
The glass wiper can be attached to the handle or the extension
tubes. It is equipped with steam holes and a dirt-scraping
rubber blade.
CARPET PLATE
29
It is inserted at the base of the floor brush. The wheels
have 2 positions to adapt to different types of carpets.
Press the L keys to adjust height.
> Optional kit
Additional cleaning and ironing kits can be attached to the
machine. Please refer to the specific instructions.