Packing Contents; Connecting The Powerline Adapter; Using The Software; Installing The Software - Eminent Powerline EM8028 Mode D'emploi

10 |
ENGLISH
devices simultaneously and use only one power outlet ! The Eminent EM8028
Powerline Networking Switch is compatible with the Powerline extension kit and the
Powerline starter kit.
The Powerline Networking Switch is an energy-saving device. When not using the
Powerline Networking Switch, it will switch to power-save mode. In power-save mode,
the device saves you up to 50% power!

1.2 Packing contents

The following parts need to be present in the packing:

EM8028 3 Port Powerline Switch 200Mbps

Network cable

CD-ROM

Manual

2.0 Connecting the Powerline adapter

1. Take the Powerline adapter out of the packing.
2. Connect the supplied network cable to the network connection of your computer.
3. Connect the other end of the supplied network cable to a LAN connection of the
EM8028 Powerline Switch.
4. Connect the Powerline Switch to a wall outlet.
Note! You can connect up-to three network devices to the EM8028!

3.0 Using the software

As soon as the Powerline Switch has been connected correctly, a network connection
will be established automatically. It is possible to secure the Powerline network. In
order to secure the network, the Powerline software needs to be installed.

3.1 Installing the software

1. Take the supplied CD-ROM out of the packing.
Insert the CD-ROM in your computer's CD-ROM or DVD-player.
2.
3. The CD-ROM will start automatically.
4. Follow the steps on your screen to install the software.

3.2 Securing your network using the software

After installing the software, an icon on your desktop has been added. This icon is
named 'Power Packet Utility'.
Double-click this icon to open the Powerline software. When the software has been
opened, the screen is divided in two parts: The upper part shows information about