Packing Contents; Ports And Indication Led's; Installation Of The Drivers; Connecting A Hard Disk, Cd-Rom Or Dvd-Rom - Eminent EM1015-R3 Mode D'emploi

1.2 Packing contents

The following parts need to be present in the packing:

One EM1015, USB 2.0 to S-ATA/ IDE Converter with Backup Button

One USB to mini USB cable

One SATA cable

One SATA power cable

One IDE power cable

One power adapter

One power converter

Installation disk with Windows 98 drivers and PC Clone Lite software

Manual

1.3 Ports and indication Led's

2.0 Installation of the drivers

Windows ME, 2000, XP, Vista, 7 have built-in drivers for the EM1015. When using
these Windows versions there is no need to install drivers. Windows will install the
correct driver automatically the moment you connect the hardware. See chapter 3 for
detailed information how to connect the EM1015.
3.0 Connecting a hard disk, CD-Rom or DVD-
Rom
We recommend that you make a backup of the hard disk you wish to use. Eminent
can not be held responsible should any loss or damage of data occur resulting in the
installation or use of this device. Eminent advises you to disconnect the EM1015 from
your computer before connecting a hard disk, CD-rom or DVD-player.
2.5" IDE connector
(1)
3.5" IDE connector
(2)
(3) SATA connector
(4) Mini USB port
LED Will be lit when the EM1015 is powered
11 |
ENGLISH