Audio Setting; Dolby Digital; Speaker Setting For Analog Audio - Denon DVD-1930CI Mode D'emploi

DVD SETUP

Audio Setting

You can change some Audio settings. It only affects during the
playback of DVD discs.
1
Press the SETUP button in stop mode.
2 Press the Cursor buttons (s or B) to select
CUSTOM, then press the ENTER button.
• The custom mode will appear.
3
Press the Cursor buttons (s or B) to select
AUDIO, then the ENTER button to confirm.
4
Press the Cursor buttons (K or L) button to select
an item, then press the ENTER button.
• This menu display contains 2 pages. Press the Cursor
button ( L ) repeatedly to show the next page.
AUDIO
DRC ON
LPCM SELECT OFF

DOLBY DIGITAL

BITSTREAM
DTS BITSTREAM
BASS ENHANCER OFF
AUDIO MODE HDMI
HDMI AUDIO 2 CHANNEL
DRC (Dynamic Range Control)
(Default : ON)
• DRC function compresses the
range of sound volume.
• DRC function is available only on
the discs that are recorded in the
Dolby Digital format.
LPCM SELECT (Default : OFF)
• Set to ON when outputting in
48kHz (or 44.1kHz).
• This function is available only on
digital outputting of a disc record-
ed in over 96kHz (or 88.2kHz).
• Sounds of the DVD-Audio which
exceed 96kHz (or 88.2kHz) will be output as 96kHz (or
88.2kHz) even if LPCM SELECT is set to OFF.
• This function is not effective for the HDMI sound output.
When playing disc with copyright protection
• The sound will be down sampled at 48kHz (44.1kHz),
even if you set to OFF.
DOLBY DIGITAL
(Default: BITSTREAM)
• Set to BITSTREAM when the play-
er is connected to a Dolby Digital
decoder.
• This function is effective only for
the COAXIAL, OPTICAL and HDMI
connections.
BITSTREAM:
DOLBY DIGITAL signals are output as Bitstream.
• For HDMI connection, if the connected equipment
is not compatible with the Dolby Digital
BITSTREAM, the signals are output as PCM
regardless of the setting.
PCM: Convert Dolby Digital to PCM.
DTS
(Default : BITSTREAM)
• Set to BITSTREAM when the unit
is connected to a DTS decoder.
BITSTREAM:
DTS signals are output as
Bitstream.
• For HDMI connection, if the connected equipment is
not compatible with the DTS Bitstream, the signals
are output as PCM regardless of the setting.
PCM: Convert DTS to PCM.
AUDIO
ANALOG AUDIO 2 CHANNEL
AUDIO
DRC
LPCM SELECT
DOLBY DIGITAL
DTS
BASS ENHANCER OFF
AUDIO MODE
HDMI AUDIO
AUDIO
DRC
LPCM SELECT
DOLBY DIGITAL
DTS
BASS ENHANCER OFF
AUDIO MODE
HDMI AUDIO
QUICK
AUDIO
DRC
LPCM SELECT
DOLBY DIGITAL
DTS
BASS ENHANCER OFF
AUDIO MODE
HDMI AUDIO
QUICK
AUDIO
DRC
LPCM SELECT
DOLBY DIGITAL
DTS
BASS ENHANCER OFF
AUDIO MODE
HDMI AUDIO
BASS ENHANCER (Default: OFF)
• Set to ON for sound output on the
bass-woofer channel when 2-chan-
nel audio source is played back.
• This function is effective only for the
5.1ch AUDIO OUT jacks. Set the
AUDIO MODE to ANALOG and
ANALOG AUDIO to MULTI CHANNEL to set this function.
• When SUB WOOFER is set to NONE in the Speaker
Configuration, BASS ENHANCER will be set to OFF
automatically.
AUDIO MODE (Default: HDMI)
• Select the sound is output from
whether HDMI jacks or 5.1ch
AUDIO OUT jacks.
HDMI: Sound is output via HDMI
connection. Output from
5.1ch AUDIO OUT connection may be restricted.
ANALOG: Sound is output via 5.1ch AUDIO OUT jacks.
Output from HDMI connection is cut off.
• Set to ANALOG when Super Audio CD is played back.
HDMI AUDIO (Default: 2 CHANNEL)
• Select the number of channels for
HDMI audio output between 2
ON
CHANNEL and MULTI CHANNEL.
OFF
BITSTREAM
BITSTREAM
• Refer to the table on page 15 for
HDMI
2 CHANNEL
the actual output settings.
• Connect appropriate external
equipment for each setting and set AUDIO MODE to
HDMI beforehand to perform this setting.
2 CHANNEL:
ON
OFF
BITSTREAM
2 channel signals are output from HDMI jack. Suitable
BITSTREAM
HDMI for monitors or projectors compatible with HDMI 2CH.
2 CHANNEL
MULTI CHANNEL:
Multi channel signals are output from HDMI jack.
Suitable for monitors or amplifiers compatible with
HDMI multi channels.
• When MULTI CHANNEL is selected, the Speaker setting
menu for HDMI AUDIO will appear (refer to page 27).
ANALOG AUDIO (Default : 2 CHANNEL)
• Set AUDIO MODE to ANALOG beforehand to perform
this setting.
• 2 CHANNEL : Output 2ch sound from the 5.1ch AUDIO
ON
OFF
BITSTREAM
BITSTREAM
• MULTI CHANNEL : Output Multi channel sound from
HDMI
2 CHANNEL
AUDIO
ANALOG AUDIO
5
Press the SETUP button to exit and activate the
new settings.

Speaker Setting for ANALOG AUDIO

When MULTI CHANNEL is selected for ANALOG AUDIO,
ON
some speaker settings will be required.
OFF
BITSTREAM
BITSTREAM
• Set AUDIO MODE to ANALOG beforehand to perform
HDMI
2 CHANNEL
this setting.
1
Press the Cursor buttons (K or
L) to select MULTI CHANNEL,
then press the ENTER button.
2 Press the Cursor buttons (K or
L) to select the below items,
then press the ENTER button.
• The custom mode will appear.
– 26 –
OUT jacks.
the 5.1ch AUDIO OUT jacks.
AUDIO
ANALOG AUDIO
2 CHANNEL 2 CHANNEL
MULTI CHANNEL
AUDIO
DRC ON
LPCM SELECT OFF
DOLBY DIGITAL BITSTREAM
DTS BITSTREAM
BASS ENHANCER OFF
AUDIO MODE HDMI
HDMI AUDIO 2 CHANNEL
AUDIO
DRC ON
LPCM SELECT OFF
DOLBY DIGITAL BITSTREAM
DTS BITSTREAM
BASS ENHANCER OFF
AUDIO MODE HDMI
HDMI AUDIO 2 CHANNEL
AUDIO
DRC ON
LPCM SELECT OFF
DOLBY DIGITAL BITSTREAM
DTS BITSTREAM
BASS ENHANCER OFF
AUDIO MODE HDMI
HDMI AUDIO 2 CHANNEL
AUDIO
MULTI CHANNEL
Speaker Configuration
DELAY TIME
CHANNEL LEVEL
EN