How To Play A Fm Radio Station That Is Stored In The Presets; How To Erase Or Overwrite A Preset; How To Connect The External Fm Radio Antenna - Geneva L Manuel D'utilisateur

3. Select one of the 6 preset keys on the remote control, and hold it down until 'store'
appears on the LED display in the Grille of the Geneva Sound System. The station
has now been stored and can be retrieved using the selected preset key.

How to play a FM radio station that is stored in the presets?

1. Press the FM key on the remote control.
2. Simply press one of the six preset keys once and the stored FM station will be
received.

How to erase or overwrite a preset?

Stored presets do not need to be erased - just use the steps set out in 3.13 above to
overwrite an existing preset and to store a new radio station in a preset.
How to connect the FM radio antenna?
The Geneva Sound System is FM ready and it has a built-in FM tuner. To get radio recep-
tion you need to connect the External Antenna that is enclosed with the accessory bag.
You find the External Antenna Connector under the Geneva Sound System on the
Bottom Panel.
Note: If you use the special Geneva aluminum floor stand with the Geneva Sound
System, you can fold the external antenna and place it within the tube. The assembly
manual provided with the stand sets out the details on how to do this.
39