How To Verify That The Remote Control Works; How To Clean The Speaker - Geneva L Manuel D'utilisateur

2. The volume range on display: 0 means silence (no sound output), 100 means
maximum output.
3. Treble and Bass: -6 means very little bass or treble, 0 means neutral , 6 means
maximum bass or treble.
4. If you turn the device off, the current values are stored. So if it is at a very high volume
when turned off, it will be at a very high volume when it is next turned on.

How to verify that the remote control works?

Every time a key is pressed on the remote control, a small red light on the LED Display
lights up quickly.

How to clean the speaker?

Unplug this Geneva Sound System from the AC power outlet before cleaning. Clean only
with a dry cloth. To avoid making scratches to the surface, we recommend that you use
the cleaning cloth included in the accessory bag.
Warning – Do not use cleaning alcohol, or other solvent fluids to clean the surface of the
Cabinet as this can both damage the lacquer and also cause electrical failures and fire if
it enters the electronics in the Geneva Sound System!
29