Assembly And Adjustment - Worx WX240L Mode D'emploi

OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the instruction
book carefully.
Usage
The screwdriver can be used for fastening or removing
screws on wood, metal, plastic and other materials.
ACTION
BEFORE OPERATION
A) Charging the Battery
NOTE:
Prior to initial use, the battery must be
charged 5 hours to fully utilize the battery
capacity.
B) Charging
Connect the USB-C cable to a compatible
charger (not included), and plug the
charger into the matching socket.
During the charging process, the green
light will flash; after the charging is
completed, three cells of the green light
will always be on. Unplug the charger
and disconnect the charging cable from
the machine. The machine is ready to be
used.
Important notice:
During the charging process, the charger
and the body surface will feel hot, which
is a normal phenomenon.
Note: the USB-C cable is suitable for the
charger ,of which the output is 5V
1000mA

ASSEMBLY AND ADJUSTMENT

Inserting and Removing Bits
Forward / reverse operation
Torsion adjustment
The torque of three gears can be adjusted
according to the demand by using the
torque adjustment button 3. The machine
has its own torque protection function,
1st gear:
FIGURE
Suitable for screwing in or out small
diameter screws
3rd gear:
Suitable for screwing in or out large
diameter screws
OPERATION
Torsion adjusting
Before each use, please adjust
to the appropriate torque gear,
otherwise the bit may slip in the
screw
Battery charge status
See Fig A
MAINTENANCE
Your power tool requires no additional lubrication or
maintenance. There is no user serviceable parts in your
power tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. Always
store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls free of
dust. If you see some sparks flashing in the ventilation
slots, this is normal and will not damage your power tool.
See Fig B
See Fig C,D
See Fig E
13
See Fig E
See Fig F