Philips SBCHC210/00 Mode D'emploi page 9

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
XP SBC HC 210.1 SRS 07-04-2003 10:22 Pagina 9
Troubleshooting
Maintenance
Hearing Safety! Continuous use at a high volume may permanently
damage your hearing.
System:
Modulation:
Effective Transmission Range:
Input level:
Power supply – transmitter:
Power supply – headphone:
Carrier Frequency
(Headphone):
Signal/Noise ratio:
Distortion:
Channel separation:
Headphone technology is incorporated under license from SRS Labs, Inc.
*) All specifications are subject to change without prior notice.
– If the headphone will not be used for a longer time,
please remove the batteries to prevent leakage and
corrosion.
– Only replace the batteries with Philips SBC HB550S
batteries.
– Do not leave the headphone near heat sources. Do
not expose to direct sunlight, excessive dust, moisture,
rain or any kind of mechanical shock.
– Do not use alcohol, thinner or petroleum-based
substances to clean the headphone or transmitter. Use a
slightly dampened chamois cloth to clean the housing.
– Do not use cleaning agents containing alcohol, spirits,
ammonia or abrasives as these may harm the housing.
Infra Red (IR)
Frequency Modulation (FM)
7 meters max. range (depending on ambient conditions
and restricted to line of sight w.r.t. the transmitter)
800 mVrms (1 kHz sine wave)
12Volt / 200 mA DC, centre positive
2x 1.2V RO3 (AAA)
Philips SBC HB550S batteries (NiMH)
2.3 Mhz (L), 2.8 Mhz (R)
> 55 dB (1 kHz sine wave , A-weighted)
< 1% THD
> 30 dB
is a trademark of SRS Labs, Inc.
Specifications*
9

Publicité

Table des Matières
loading

Table des Matières