Napoleon HIGH COUNTRY 3000H-1 Manuel D'installation Et D'utilisation page 21

WARNING
!
• Ventilation openings are required in enclosures up to 96" (244cm) high. They are recommended for all
enclosures above 84" (213.4cm), combustible fi nishing materials may be used on the front face.
• Use only a non-combustible material to fi nish the face of the appliance. A non-combustible material such as
cement board is required for this purpose.
• Do not insulate the steel body of the appliance.
The appliance is shipped with a template that is 1/8" (3.2mm) larger on the top,
bottom and each side than the faceplate. Leave the template in place when
installing the fi nishing material to ensure the faceplate will fi t inside the fi nishing
material edging.
note:
A ventilated
enclosure is
recommended.
See "ventilation
openings" section.
DRYWALL
(197MM)
7 / "
3
4
MIN
40"
(1016MM)
55 / "
1
2
(1410MM)
EMBER STRIP
7
3
BOARD FROM THE SIDE OF
THE UNIT TO COMBUSTIBLES
TEMPLATE
/ "(197MM) MIN. CEMENT
4
6.0 fi nishing fi nishing
NON-COMBUSTIBLE
MATERIAL
84" MINIMUM
ENCLOSURE
HEIGHT WITH
VENTILATED
ENCLOSURE. SEE
VENTILATION SIZE
REQUIREMENTS.
Objects placed in front
of the appliance must
be kept a minimum of
48" (1219mm) away
from the front of the
appliance.
W415-2044 / 02.14.20
EN
21