Troubleshooting; Disposal Considerations; Manufacturer & Importer (Uk) - Klarstein MILKYSAFE Mode D'emploi

EN
20

TROUBLESHOOTING

Problem
Condensation on outside of
door.
Condensation on the inside
of the cabinet.
Too cold / not cold enough
inside the cabinet.
No power to cooler.

DISPOSAL CONSIDERATIONS

If there is a legal regulation for the disposal of electrical
and electronic devices in your country, this symbol on the
product or on the packaging indicates that this product must
not be disposed of with household waste. Instead, it must be
taken to a collection point for the recycling of electrical and
electronic equipment. By disposing of it in accordance with
the rules, you are protecting the environment and the health of
your fellow human beings from negative consequences. For
information about the recycling and disposal of this product,
please contact your local authority or your household waste
disposal service.
MANUFACTURER & IMPORTER (UK)
Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain:
Chal-Tec UK limited
Unit 6 Riverside Business Centre
Brighton Road
Shoreham-by-Sea
BN43 6RE
United Kingdom
Possible cause and suggested solution
Humidity in the room is high. This is also to be
expected if the room is very warm.
This is also caused by high humidity. You can
minimise this by only keeping the door open only as
long as you need to.
Adjust thermostat up or down accord ingly. Make
sure nothing is stopping the door from sealing
properly.
Check power cord, power supply or on/off switch.