General; Introduction - RENINSHAW PSU3 Manuel D'installation Et D'utilisation

1-4

Introduction

The PSU3 provides a +24 Vdc supply for Renishaw interface units.
The PSU3 power supply unit may be used with several types of Renishaw interface. Please see
individual product handbooks for connection details. More than one interface may be driven from
one power supply as long as the maximum output current is not exceeded (24 Vdc ±2 Vdc 0.5 A
maximum).
Front
Rear
24 Vdc ±2 Vdc 0.5 A maximum.
The PSU3 is over voltage and over current protected.
Output

General

Power is provided via an IEC mains connector.
This is the mains isolation device and must
remain accessible at all times.
100 Vac to 240 Vac (-15% to +10%)
50 Hz to 60 Hz, 25 W maximum.
When then green
LED is lit, the power
supply is operating.
Mains switch
Input