Belkin F5U109 Guide D'utilisation page 12

Windows
20) Select "Setup" from the pull-down menu.
21) Select the "Local" tab.
22) Select the COM port assigned to the PDA adapter
during hardware installation. (Typically COM 3. To
confirm the assigned COM port number, check "Ports"
in the Windows Device Manager. If this is the first time
the Palm Desktop Software has been launched, it will
automatically detect the COM port number.)
23) Make sure that the "Speed" option is set to
"As fast as possible".
Your USB PDA Adapter is now fully functional and ready
to synchronize the data between your Palm device and
your PC.
Important Note: If you wish to uninstall the USB PDA
Adapter driver, please use the uninstall program located
in the "Win2000" folder on the PDA Adapter installation CD.
2000 Installation
®
10
(continued)