Samson SE10 Mode D'emploi page 5

Using the SE10
1. Install the cable by connecting to the screw terminal located at
the bottom of the ear pad. Then install the adapter that's cor-
rect for your wireless body pack. Be sure to tighten the locking
ring to hold the adapter firmly in place.
2. The microphone can be re-sized to fit nearly any size ear
simply by bending the wire into a new shape. Be sure to fit the
microphone's ear pad behind your ear. Do not wrap the ear pad
around your ear. See the following graphic.
3. For optimal performance the microphone should be positioned
close to the skin and towards the corner of the mouth, approxi-
mately a half inch away.
4. Once the microphone is in position, use the clothing cable clip
to restrain the cable to ensure the microphone stays in place.
5. Position the moisture guard ring as close to the capsule as pos-
sible.
6. For outdoor use and to help reduce p-popping, install one of
the included windscreens.
SE10
5