Halosense SaltAir ST-UV01 Manuel Du Propriétaire page 3

Congratulations on your purchase of the SaltAir
SaltAir is an ultrasonic particles dispenser using ultrasonic frequency vibration theory to transform the saline
UV
solution into 1-5 microns salt particles. These particles are able to penetrate deep into the lungs, to alveoli, and help
to clear secretions, fight bacteria, viruses and fungus, reduce inflammation, improve bloodstream oxygenation and
humidify the entire respiratory tract.
Salt therapy has been successfully used in the treatment of chronic or acute respiratory diseases, as well in
prevention. It helps to reduce inflammation, unclog blockages, clean the respiratory system and improve breathing. It
also prevents the development of respiratory diseases, and protects against cold and flu viruses by maintaining a
good hygiene throughout the entire respiratory system.
Salt therapy is safe for all people and ages, including infants and pregnant women. It does not interact with any salt
free diet, medication or medical condition including high blood pressure. The tiny particles of salt deposit on the
respiratory mucosa and come off with mucus. Salt therapy can also be used for respiratory problems in pets.
SaltAir air salinizer comes with an electric adaptor, instruction manual, measuring cup and free three month
UV
supply of natural rock salt for the saline solution. This device is easy to use. Just plug-in and use it over night. Place
the device close to your bed, same level with your body, on a night table and enjoy the wonderful effect of natural salt
therapy. The SaltAir
device is very quiet and will not disturb your sleep. For best results, we recommend continuous
UV
use
OPERATING INSTRUCTIONS
1. Place the device on a level, stable and dry surface where it will be used (nightstand)
and remove the upper cover and the inside water cover. (Fig 1). Connect the AC
adapter to the base. (Fig 2)
2.
In order to fill the water tank, use the measuring cup provided and fill the water tank
up to 300ml with water. (Fig 3)
3. Use one measuring cup of water to dissolve ½ teaspoon rock salt and pour the saline
solution into the water tank, over the existing water, not exceeding the Max level. It is
normal to have deposited impurities in the cup after dissolving the rock salt that is
natural and unprocessed – please discard those. NEVER exceed the Max level!
NEVER fill in water during operation! If the tap water is hard or contains chlorine it is
better to use bottled water. (Fig 4)
4. Start as recommended with ½ teaspoon of rock salt and increase the amount if
needed, at the next refill. Do not exceed 1 teaspoon of rock salt for the whole water
tank capacity but rather maximize your exposure to salt therapy.
5. Wipe dry the water tank using a paper towel. Place the water cover (doughnut shape)
over the surface of the water and close the unit with the upper cover. (Fig 5)
6. Plug in the electric adaptor. (Fig 6)
7. Push the ON/OFF button. The power LED turns 'On' and the device will start working.
The microscopic salt particles come out of the device through the top opening. Mist
is not very visible and this is normal! Only a light air stream will be felt coming out
of the device. (Fig 7)
8. TIMER – you can set the unit to work for 3h, 6h, 9h, ON, OFF when consecutively
pressing the button. (Fig 8)
9.
LIGHT – offers two UV light intensity for water treatment against bacteria or mold; you
can use it at night during functioning or during the day when the unit is OFF. (Fig 9)
- Home Salt Therapy ultrasonic air salinizer!
UV
1
Fig 1
Fig 2
Fig 3