BE WHIRL-A-WAY 85.403.003 Guide De L'utilisateur page 5

OPERATING INSTRUCTIONS
between the spray tips and the surface being cleaned.
While operating your surface cleaning system, please ensure that the ny-
lon brush skirt remains in contact with the surface being cleaned. Do not
operate on vertical or overhead surfaces. We strongly recommend that
safety eye goggles, gloves and work boots be worn when operating this
Whirl-a-Way. Keep hands and feet away from the high pressure, high
speed rotating arm that is protected by the plastic cover.
Should your surface cleaner not be used for long periods of time, it is
recommended that you remove the hose from the top of the rotary head
and a vegetable oil be used to lubricate the swivel head's internal parts.
Manually turn the rotary arm to allow lubrication of all internal parts before
storing.
You will quickly find your surface cleaning system a welcome addition to
your pressure washing applications. It is designed to give you a safe
and rapid method for cleaning hard surfaces, and will save you time in
comparison to using a conventional gun and wand. The durability of this
surface cleaning system is enhanced by the way it is handled by the op-
erator. Please take care to ensure that the Whirl-A-Way is not continu-
ously being swung against buildings, curbs, etc., which can damage the
cover. Also, be aware that the high speed rotating arm must not come
in contact with rigid protruding objects which can quickly damage or
completely break off the steel arm. Finally, do not apply excessive weight
to the plastic cover.
5