BE WHIRL-A-WAY 85.403.003 Guide De L'utilisateur page 12

Nozzle Requirement
PUMP OUTPUT
3 GPM
4 GPM
5 GPM
6 GPM
Rotary Head Repair Parts
A repair kit for this Whirl-a-Way's rotary head, is available.
If you encounter problems with the rotary head after the six month war-
ranty has expired, this repair kit (part #85.790.010) allows you to replace
the inner components very quickly.
The rotary head has a snap ring on the bottom holding all the bearings
inside. By removing the snap ring and washer, you can tap off the outer
shell with a hammer while the output shaft is held in a vice. The rotary
head repair kit can then be used to replace the worn items inside the
rotary head shell.
PART #
NO#
85.790.010
1
85.790.001
2
85.790.002
3
85.790.011
4
12
ROTARY HEAD REPAIR
NOZZLE REQUIREMENT
85.225.020 (2 GPM/25°)
85.225.025 (2.5 GPM/25°)
85.225.030 (3 GPM/25°)
85.225.035 (3.5 GPM/25°)
DESCRIPTION
Rotary Head Rebuild Kit
Inlet Valve
Inlet Valve Viton O-Ring
Outlet Shaft
QTY
2
2
2
2