Philips HQ6940 Mode D'emploi page 3

Troubleshooting
This chapter summarises the most common
problems you could encounter with the
appliance. If you are unable to solve the problem
with the information below, contact the Consumer
Care Centre in your country.
Problem Cause
Reduced The
shaving shaving
performance. heads are
dirty. You
have not
cleaned
the shaver
well
enough
or you
have not
cleaned it
for a long
time.
Long hairs
obstruct
the
shaving
heads.
The
shaving
heads are
damaged
or worn.
The shaver The shaver
does not work is not
when I push connected
the on/off to the
slide upwards. mains.
Skin irritation. Your skin
needs
time to
get used
to the
Philips
shaving
system.
4222.002.5056.1
Solution
Clean the shaver
thoroughly before
you continue
shaving. See
chapter 'Cleaning
and maintenance'.
Clean the cutters
and guards with
the cleaning brush
supplied. See
chapter 'Cleaning
and maintenance',
section 'Every two
months: shaving
heads'.
Replace the
shaving heads
every 2 years
for optimal
shaving results.
See chapter
'Replacement'.
Put the mains plug
in the wall socket.
Skin irritation
during the first 2-
3 weeks of use is
normal. After this
period, the skin
irritation usually
disappears.
3/9