Télécharger Imprimer la page

Unpacking The 9600 Plus Calibration Tester - Welch Allyn 9600 Plus Mode D'emploi

Testeur d'étalonnage
Masquer les pouces Voir aussi pour 9600 Plus:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Directions for Use
WARNING
WARNING Use of this equipment is limited to the biomedical
laboratory environment or equivalent.
WARNING Use of this equipment adjacent to or stacked with
other equipment should be avoided because it could result in
improper operation. If such use is necessary, this equipment and
the other equipment should be observed to verify that they are
operating normally.
WARNING Portable RF equipment (including peripherals such as
antenna cables and external antennas) should be used no closer
than 30 cm (12 inches) to any part of the 9600 Plus Calibration
Tester, including cables specified by the manufacturer. Otherwise,
degradation of the performance of this equipment could result.

Unpacking the 9600 Plus Calibration Tester

Unpack the 9600 Plus Calibration Tester and inspect for missing
items. Retain the shipping materials to return the device to
Welch Allyn for recalibration.
The following items are enclosed:
• A 9600 Plus Calibration Tester
• A package containing a power supply and four mains plug
inserts
• The Directions for Use
• A Carrying Case
If any of these items are missing after opening, please contact
Welch Allyn Customer Service at:
http://www.welchallyn.com/en/about-us/locations.html
Chapter 1 Introduction
5

Publicité

loading