Battery Information - LEXIBOOK JG7800DC-1 Mode D'emploi

Controllers:
To connect the controllers to the main unit, plug in the end of the cable of controller 1 or 2 into the USB
port 1 or 2. You can connect up to two controllers simultaneously as some games allow two players
3
to play (the mention « 2P » will show in the menu when applicable).
The Plug N' Play TV Games Console operates with a micro USB cable or a power adapter (not in-
cluded) with the following requirements: 5V
Input: 100V - 240V ~ 50 / 60Hz, 0.3A
Parental advisory: The adapter is not intended to be used as a toy. It must be used under
parental supervision.
Warning: Disconnect the adapter if the game is not used for a long period of time to prevent
overheating. When the game is powered by an adapter, do not play outside. Check the state of the
adapter and the connection cords regularly. If their condition is deteriorating, do not use the adapter
until it has been repaired. The toy shall only be used with an adapter for toys. The adapter is not a
toy. The console should be disconnected from the power supply to be cleaned if liquids are used for
cleaning. The toy is not intended for children under 3 years old. Misuse of the adapter can cause
electrical shock.
The toy is only to be connected to Class II
equipment bearing the following symbol.
WARNING: Malfunction or loss of memory may be caused by strong frequency interference or electro-
static discharge. Should any abnormal function occur, reset the unit, or unplug the power adapter from
the mains socket and plug it back in.
JG7800DC-1_JG7800FZ-1_JG7800PJM-1_IM1218_V09_317.indb 9

battery information

,1000 mA
9
Plug N' Play
TV Game Console
5/28/18 12:33 PM