Contents Of The Packaging; Key Guide; Battery Information - LEXIBOOK TV Motion Games Console JG7300 Mode D'emploi

Introduction
Congratulations! We're delighted to count you as one of the great number of people enjoying Lexibook® products.
You've just bought the new interactive "TV Motion Games Console".
We invite you to read this instruction manual carefully to make the most out of all the functions offered by your "TV
Motion Games Console" and so that you know all the detailed instructions, as well as the safety rules.

Contents of the packaging

When unpacking, ensure that the following elements are included:
1 x «TV Motion Games Console»
1 x AV Cable (cable already connected to the console)
1 x Instruction manual
WARNING: All packaging materials, such as tape, plastic sheets, wire ties and tags are not part of this toy and
should be discarded for your child's safety.

Key guide

Check the diagrams on page 3 to see where all the console buttons are.
1. "POWER" button to switch the console on or off
2. "RESET" button to restart the console and return to the game-selection screen
3. Charging LED
4. Camera / Motion detector
5. Mains input
6. AV output
7. Battery compartment

Battery Information

The "TV Motion Games Console" functions with either:
- 1 x 5.2V , 300mA adapter
- 4 x 1.5V AAA/LR03 batteries (not included)
• Inserting the batteries into the games console
1. Using a screwdriver, remove the battery cover on the bottom of the console.
2. Insert 4 x AAA/LR03 batteries following the polarity shown at the bottom of the battery
compartment, and according to the diagram opposite.
3. Replace the cover and tighten the screw.
Note: The battery power level is indicated by the LED located on the front of the console. A
reduction in the intensity of the LED signals a drop in the battery power level.
Non-rechargeable batteries are not to be recharged. Rechargeable batteries are to be removed from the product
before being charged. Rechargeable batteries are only to be charged under adult supervision. Different types
of batteries or new and used batteries are not to be mixed. Only batteries of the same or equivalent type as
recommended are to be used. Batteries are to be inserted with the correct polarity. Exhausted batteries are to
be removed from the toy. The supply terminals are not to be short circuited. Do not throw batteries into a fire.
Remove the batteries if you are not going to use the game for a long period of time.
• Plugging the games console into a power socket
1. Make sure that the console is switched off.
2. Connect the plug of the adapter (not included) into the power input on the back of the console.
3. Plug the other end of the adapter into the power socket.
4. Switch the games console on.
Warning: Unplug the adapter when the console is not being used for long periods of time in order to avoid
overheating. When the console is powered by an adapter, do not play on it outside. Check the condition of the
adapter and power cables regularly. In case of deterioration, do not use the adapter until it has been repaired.
The console must only be used with the recommended adapter. The adapter is not a toy. The console must be
disconnected from the mains when being cleaned if liquid is being used to clean it. This game is not intended for
children under 3 years of age.
JG7300IM1252_25Jun_V04.indb 9
for toys with positive center
9
. (not included)
22/06/2012 12:09 PM