Cleaning The Dust Container And Filter System - djive VACUMATE one PRO Mode D'emploi

CLEANING THE DUST CONTAINER
AND FILTER SYSTEM \\\
1. Make sure that you do not press the ON switch.
2. Place the hand-held part down flat and press the long release button under
the LED display to release the dust container module from the handle.
3. Disassemble the dust container and the filter system. Then clean the dust
container using a damp cloth only.
4. Do not use detergents, polishes or air fresheners to clean the dust
container and do not place the dust container in the dishwasher.
5. Clean the cyclone cover with the 2in1 Furniture Brush to remove lint and
dust.
6. Before replacing, make sure the dust container is completely dry.
7. Close the dust container bottom until it snaps into place and is securely
closed.
Separating the dust container module from the hand-held part
1.
Reinsert the dust container module
22
2.