Publicité
Les langues disponibles
Les langues disponibles
Step 4: Hanging Display
Firstly lift up the TV plate installed the LCD, making the trough on the arm fit to the trough
on it, according trough to embed the TV plate into the wall plate (Fig. 7).
Once the TV is positioned in place, fasten the Tighten Bolts on Receiving Joint clockwise
to secure the display to the Arm Assembly.
Warning:
Some TV require two people to lift,
as we are not responsible for any
personal injury or product damage
due to mishandling.
Tighten bolt
Fig. 7
Display Adjustments
Roll Control
Function-Horizontal leveling of the display.
Operation-Grasp the sides of the display, and roll it into the desired position. Then
adjusting Roll Tension.
Angle adjusting
1. Adjusted with the TV plate
With circumvolve the wall plate, TV can adjust in the direction of left, rihgt, up and down.
Vertical Adjusting angle is from -5º to 20º. Level adjusting angle is 20º.
Choose the desired angle and turn clockwise the Tension Knob on the right of the arm.
33
Publicité
