Table des Matières
Publicité
Safety instructions
WARNING
Risk of burns!
The radiator's surface can heat up to 110 °C
(230 °F).
Be careful when touching the radiator.
►
CAUTION
Risk of burns due to squirting hot water
when evacuating air!
Protect your face and hands.
►
Maintenance
Vent the radiator after commissioning and
►
following lengthy interruptions of opera-
tion.
Use a commercially available radiator key.
►
Cleaning
Use only mild, non-abrasive cleansing
►
agents.
Complaint
Contact your local dealer.
►
Installation and repairs
Have the installation and repairs performed
►
by a specialized tradesman so that your
claims under warranty are not forfeited.
Disposal
Recycle or dispose of disused radiators, in-
►
cluding accessories, properly. Observe local
regulations.
EN – Installation instructions
The radiator may only be installed by a special-
ized tradesman.
Safety instructions
Read these instructions thoroughly prior to
►
installation/commissioning.
After installation pass the instructions on to
►
the end used.
WARNING
Risk of injury!
Take the weight of the radiator into ac-
►
count (see manufacturer's data).
At 25 kg and above, work with lifting
►
equipment or several persons.
Operating conditions
Observe operating conditions for wa-
►
ter heating installations according to
DIN 18380 "VOB German Construction Con-
tract Procedures".
Observe water's condition according to VDI
►
[Association of German Engineers] 2035
"Prevention of damage in water heating
installations".
Observe limitations of use in damp loca-
►
tions according to DIN 55900 "Coatings for
radiators".
Use radiator only in closed heating systems.
►
Store and transport radiator only in the
►
protective packaging.
Observe minimum clearances between ra-
►
diator and circumjacent objects for air cir-
culation.
Complaint
►
Contact the supplier.
Disposal
Packaging and any parts that are not need-
►
ed should be recycled or disposed of prop-
erly. Observe local regulations.
Technical features
•
Operating pressure: max. 10 bar, for high-
pressure version max. 16 bar
•
Test pressure: 1.3 x operating pressure
•
Flow temperature: hot water up to 110 °C
(230 °F)
Directions for installation
Protecting radiator from damage
When installing, only remove protective
►
packaging at the fastening and connection
points.
Only remove protective packaging com-
►
pletely during final cleaning or prior to
commissioning.
Connecting blocks
Assembling radiators delivered in blocks
►
(see separate installation instructions).
9
Publicité
Table des Matières
