Fixman PROFESSIONAL 49050 Manuel Du Propriétaire page 11

Hazard Warnings (cont'd)
RISK OF INJURY (cont' d )
How to prevent it:
Use only impact grade sockets on an impact wrench.
Do not apply excessive force to the tool Let the tool perform the work.
Never point discharge of tool at self or others.
Do not pull trigger unless tool contact safety device is against work surface.
Never attempt to drive fasteners into hard surfaces such as steel, concrete or tile when using air tools.
Use only accessories identified by the manufacturer to be used with specific tools.
Maintain the tool with care.
Keep a cutting tool sharp and clean. A properly maintained tool with sharp cutting edges reduces
the risk of binding and is easier to control.
Check for misalignment of binding or moving parts, breakage of parts and any other condition
that affects the tool's operation. If damaged, have the tool serviced before using.
Use of an accessory not intended for use with the specific tools increases the risk of injury to persons.
Always shut off the compressor, remove the plug from the outlet, and bleed all pressure from the
system before servicing the compressor or when the compressor is not in use.
Do not operate the unit with the shroud removed.
11
OWNER'S MANUAL