Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
6. RESET THE CONTROL UNIT
not release the buttons until the process is complete.
7. TROUBLESHOOTING
Error No.
Description
Electrical problem
E02
Screw rod error
E04
Digital controller connection error
Collision avoidance system
Electrical problem
Desktop inclines
E11
No connection
Abnormal current
Motor wire broken
E14
Hall wire broken
Short circuit
Note:
reset and return to normal operation after approximately 20 minutes.
the current height displayed.
CUSTOM SETTINGS
For all of the below Custom Settings:
and
Custom Setting 1: Minimum & Maximum Height Settings
Note: Default minimum height is 62cm (24.4") and the adjustable range is 62-118cm (24.4"-46.4"). Default maximum height is 128cm (50.4") and the
adjustable range is 72-128cm (28.3"-50.4").
8
"
and "
Solution
Disconnect power for
Reset the system
Check the connection
then reconnect the power
Release the button
Replace the control box
Reset the system
Replace the control box
Check then replace the motor cord
Check then replace the motor cord
at any time.
once and then press
Error No.
Description
Motor failure
Desk run in wrong direction
Weight overload
E21
No connection
Motor wire broken
E24
Hall wire broken
Short circuit
Desk run in wrong direction
E42
Memory function failure
Sensor Failure of Collision
Avoidance System
or
to set desired minimum height. Press
once and then press
or
to set desired maximum height. Press
Solution
Reset the system
Remove the items on the desktop
Replace the control box
Replace the control box
to save:
Publicité
Table des Matières
