Fellowes Cambio Mode D'emploi page 4

STEP 3
Assemble the lift columns
of the lifting columns facing inward. Make sure the mounting holes in the lifting
columns completely align with the screw holes on the crossbar.
STEP 4
Assemble the feet
foot with the screw holes on the lifting column.
M6x16
STEP 5
Assemble the fixing plate
either the right side or the left side.
*Note: The arrow on the fixing plate indicates the direction of sliding in the control box. Follow the direction of the arrow to mount the control box in the next step.
4
F
I
M6x10 Hex
N
OR
E
M
M
D