Installing The Batteries; Power Indicator; General Information - Grant 2020 Serie Mode D'emploi

2.1

Installing the batteries

The 2020/2040 uses six AA size alkaline batteries located under the removable cover
shown below. To insert new or change the existing batteries:
1. Open the battery cover by pushing down and sliding as shown.
2. Insert six AA* batteries, ensuring the correct polarity.
3. Refit the battery cover
* It is recommended that all replacement batteries are of the same manufacturer, type
and condition.
Important: Remove the batteries when the logger is not used for long periods of
time or is being transported
2.2

Power indicator

Battery indicator
When logging please ensure that the batteries in the unit have sufficient capacity to
complete the logging task. This can be checked via the battery indicator located in the
top right of the display.
External power indicator
The logger may be powered from an external source (10-18V DC)
Important: To ensure data protection in the case of an unexpected power loss,
please ensure that batteries are fitted whilst the unit is operational.
18108 Version 17
Page 3
HIGH
CAPACITY
www.grantinstruments.com

2. General Information

LOW
CAPACITY
SQ2020/40