Unit Control; Turn The Unit On/Off; Establish The Set-Point Temperature; Establish The Operating Mode - Airzone AZAI6WSCDKA Mode D'emploi

UNIT CONTROL

Turn the unit on/off

Open the drop-down menu, tap
Touch the On and Off buttons individually or by groups from the Home screen or tap the unit
to access the control screen for turning on and off the zone.

Establish the set-point temperature

Open the drop-down menu, tap
Adjust the set-point temperature by sliding on the screen
buttons.

Establish the operating mode

Open the drop-down menu, tap
The available modes, depending on the installation type are:
Auto. Allows automatic switching between cooling and heating.
Cooling. The air conditioning unit will start a cooling cycle.
Heating. The air conditioning unit will start a heating cycle.
Fan. The system works exclusively in fan mode.
Dry. The air conditioning unit will start a dehumidification cooling cycle
decreasing the humidity.

Establish the fan-speed

Open the drop-down menu, tap
Tap the fan icon to define the operating speed among the available speeds.

Get information from unit

Open the drop-down menu, tap
Tap the settings icon.
Unit information. Shows the firmware version running.
Tap the confirmation icon to save changes.
4
Home
and select the Daikin unit to control.
Home
and select the Daikin unit to control.
Home
and select the Daikin unit to control.
Home
and select the Daikin unit to control.
Home
and select the Daikin unit to control.
or by tapping the + and -