Installation; Mounting The Pdu - Tripp-Lite PDUMNH20HV Manuel De L'utilisateur

3. Installation

3.1 Mounting the PDU

The PDU supports five primary mounting configurations: 2U Rack, 1U Rack, 0U Rack,
Wall and Under-Counter.
Note: Regardless of configuration, the user must determine the fitness of hardware
and procedures before mounting. The PDU and included hardware are designed for
common rack and rack enclosure types and may not be appropriate for all applications.
Exact mounting configurations may vary.
3.1-1 2U Rack Mounting: Attach the
included brackets to the sides of
the PDU with the included screws.
After installing the brackets,
position the PDU in the rack and
install four user-supplied screws
through the unit's brackets and
into the rack rails as shown.
3.1-2
1U Rack Mounting: Use three
screws to attach each of the two
longer mounting brackets to the
PDU as shown. You can mount
the PDU in a recessed position by
attaching the mounting brackets so
they extend beyond the front panel
of the PDU. (If you plan to use the
cord retension shelf, attach the
mounting brackets in a recessed
position.) Mount the PDU in the
rack by inserting four user-supplied
screws through the mounting
brackets and into the mounting
rack rails.
16-11-159-933684.indb 5
3.1-1 PDUMNH30HV & PDUMNH32HV
3.1-1
PDUMNH30HV & PDUMNH32HV
3.1-2 PDUMNH20HV
3.1-2 PDUMNH20HV
5
1/3/2017 3:57:55 PM