Cleaning And Maintenance; Safety Information; Cleaning; Troubleshooting - CASO DESIGN PJ 800 Mode D'emploi

Juicing vegetables and fruit
Check speed level chart above to determine correct speed for the fruit/vegetable you are
using.
► Let the device work for 1 min, then pause for 1 min and repeat this 3 times. Let the
motor cool down completely before you use it again. This way the service life of the
device will be prolonged and it will work more efficiently.

15 Cleaning and Maintenance

This chapter provides you with important notices with regard to cleaning and
maintaining the device. Please observe the notices to prevent damages due to cleaning
the device incorrectly and to ensure trouble-free operation.

15.1 Safety information

Attention
Please observe the safety instructions, before cleaning your device
► Unplug the device when not in use and before any cleaning.
► Never immerse the device, cord or plug in water or other liquids and do not place in the
dishwasher.
► The blades are really sharp. Handle them with care.

15.2 Cleaning

1. Before cleaning, please let the device cool down sufficiently and pull out the power wire.
2. Firstly, open the handle. Take out the transparent cover, juicing net, pushing bar, juice
jug and residue barrel. Clean them in clear water. Use a brush for cleaning.
3. Do not clean the main machine. Only wipe it with a damp cloth. The other parts
(pushing bar, cover, middle ring, residue barrel, juice jug) can be directly cleaned with
water.
4. After cleaning, use a dry cloth to dry the appliance. Mount it and store it at a dry, safe
place.
5. To clean the juicing noozle, firstly remove the middle ring.
6. The cutting teeth in the juicing net are very sharp. Please operate carefully.
7. The blades are very sharp. Hold them under running water to clean them, do not clean
them by hand.

16 Troubleshooting

This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
Caso Entsafter PJ 800 30