Design And Function; Overview; Assembling; Features - CASO DESIGN PJ 800 Mode D'emploi

13 Design and Function

In this chapter, you'll find important information on the design and function of the device.
around transparent cover.
6. Tight and clinch the handle.
7. Push juicer jug over the juicing noozle.
► This device is equipped with a safety lock. When the parts are not locked in properly,
the motor will not turn on.
► Before juicing, first confirm that the juicing net and the rotor are clutched in position.
► When using the device for the first time, it may happen that a strange odor is caused by
the engine by operating residues. This disappears with repeated use.

13.3 Features

1. The opening of the feeding port has a really large diameter, so that entire apples or
pears can be put in for juicing. No cutting into pieces necessary – quick and easy.
2. The design is nice and simple, combined with structure. Easy to operate and to clean.
3. High speed motor with overheating protection – highly efficient, time and energy saving
and durable.
Caso Entsafter PJ 800

13.1 Overview

1. Pushing bar
2. Transparent cover
2a Feeding port
3. Juicing net
4. Middle ring
4a Juicing noozle
5. Handle
5a Rotor
6. Residue barrel
7. Main machine
8. Juicer jug

13.2 Assembling

1.
2.
3.
and clinch it with a soft clockwise rotation
(deassembling: anti clockwise).
4.
5.
Please note
Place main machine on the table.
Place middle ring on the main machine.
Assemble the juicing net carefully on the rotor
Place transparent cover on the middle ring.
Clinch residue barrel under the ejection and
28