Operation; Disposal - therm-ic CARE O REFRESHER Mode D'emploi

INSTRUCTIONS FOR USE / ENGLISH

OPERATION

Turning the device on:
Pressing the function key (1.3) once turns on and
puts the Therm-ic Refresher into continuous
operation mode; the operation display (1.1) will be
illuminated.
Turning the device off:
Pressing the function key (1.3) for an extended period
of time (appox. 2 seconds) turns off the Therm-ic
Refresher. The operating display (1.1) will turn off.
Operating timer:
The time can be enabled using the function key (1.3).
Press the function key (1.3) accordingly to set the
timer duration (1 hour, 3 hours or 6 hours). The LED
(1.2) for the selected timer duration will light up.
Press the function key (1.3) repeatedly to change the
timer duration: ON/continuous operation > 1h > 3h>
6h > OFF > ON/continuous operation > 1h, etc.
If none of the three timer LEDs (1.2) is on, the Therm-
ic Refresher is in continuous operation mode.
USB output (1.4):
USB output 5V / 2A available for recharging the
Therm-ic range C-Pack, S-Pack and integrated
systems (gloves, boots, liners).
This output is active when the Refresher system is
connected to AC outlet.

DISPOSAL

If the device can no longer be used, please dispose
of it and its packaging in an environmentallyfriendly
way that is in accordance with current regulations.
Do not throw the device away with normal household
trash. Instead, dispose of the parts at a collection site
for electrical waste.
Packaging materials are raw materials and can
be recycled. For this reason, please recycle the
packaging. Please contact your local authority for
more information.
Information subject to change.
This product complies with the relevant regulations
and guidelines.
6