Device Description; Technical Data; Safety Functions; Function Description - therm-ic CARE O REFRESHER Mode D'emploi

INSTRUCTIONS FOR USE / ENGLISH
• Repairs to electrical equipment may only be carried
out at specialised repair facilities. Improper repair
could create substantial danger for the user.
• Never wind the power cable around the unit.
• When not in use store the unit folded and in a dry place.
• Do not leave this device switched on while unattended.
• The unit must not be used for any purpose other
than that intended.

DEVICE DESCRIPTION

1.1 Status display
1.2 Timer time display (1h/3h/6h)
1.3 Function key
1.4 Charging point USB

TECHNICAL DATA

230V version: 230V~ 50Hz 60W
120V version: 120V~ 60Hz 60W
12V version: 12V DC 45W

SAFETY FUNCTIONS

• Overheating protection
• Temperature control

FUNCTION DESCRIPTION

• Dries completely soaked boots or gloves efficiently in a
few hours without damaging the material.
• UV light reduces bacteria and germs.
• Absorbs unpleasant odours.
• The air flowing from the nozzles in the shoe reaches
a temperature of approx. +20ºC above room
temperature.
• Collapses to a small size and is extremely quiet.
• Automatic sleep timer.

IMPORTANT USAGE NOTES

• Open the unit (2)
• Take out the tubes and point the nozzles in the
direction of the toe of the boot (in the maximum
position, the tubes can be locked) (3).
• Slide the tubes into the boot (4).
• WARNING: There must be no objects in the boot during
use, otherwise the air circulation can be impeded.
• Plug in the power cable and switch on the unit.
• To save energy, it is recommended to disconnect
the device from the power supply if not used for a
prolonged period of time.
5