Ricoh RPIP Interface Box Type S3 Manuel Utilisateur page 6

Settings for This Product
Settings for This Product
The machine's settings can be specifi ed by using the control panel of this MFP or Printer, Web Image
Monitor, or print drivers.
Specifying the settings differs depending on the MFP or Printer model.
Connecting Finishing Peripherals
Select the paper output destination
Selecting from the control panel of the MFP or Printer
1. Press the [User Tools] key.
2. Press [System Settings].
3. Check that [General Features] is selected.
4. Press [Output Tray:].
5. Press [Extended Option's Tray].
6. Press [OK].
7. Press [Exit].
8. Press the [User Tools] key.
4
CWW222