Wire-Mesh Grill; Cable Clip; Wind Screen - Harman AKG MICROLITE LC81 MD Mode D'emploi

6.2.1 Wire­mesh grill
Wire-mesh grill for EC81 MD
The supplied wire‑mesh grill (WM81, WM82) consists of several
layers of different materials.
The wire‑mesh grill is used as protection against dirt and make‑up.
Additionally, the wire‑mesh grill protects the microphone membra‑
ne from wind and pop noise.

6.2.2 Cable clip

The cable clip is used to fasten the cable to the article of clothing,
which relieves stress on the microphone cable.
The microphone is attached to the housing by the clasp on the clip:
This helps ensure the microphone cable is protected.

6.2.3 Wind screen

Wind screen for EC81 MD
MICROLITE MANUAL
Fig. 29: WM81
Fig. 31: H3 Cable clip
Fig. 32: W81
HEAdWORN MICROPHONES
Fig. 30: WM82
Wire-mesh grill for EC82 MD
Fig. 33: W82
Wind screen for EC82 MD
Wire­mesh
grill
Cable clip
Wind screen
79