Orsy ® Flex Shelving System Wall Mounting / Floor Mounting - Würth ORSY FLEX 350 Traduction Des Instructions De Service D'origine

C (1 : 2)
C
B (1 : 2)
A (1 : 1)
B
A
Distance disc
Fig. 4
­ H ang­the­doors­with­the­door­hinge­pin­in­the­eyelets­provided­at­the­top­and­
bottom.­(Use­the­spacer­supplied­when­attaching­the­door)
3.2 ORSY Flex shelving system wall mounting / floor mounting
®
You have two installation options:
A)­Set­up­the­ORSY Flex shelving system freely
®
You can set up the ORSY Flex shelves freely.
®
Attention: Risk of tipping over. Shelves must be screwed to the floor.
B)­Wall­mounting
For wall mounting, use the enclosed fixing screw with the dowel (see Fig. 1, Item x). If you use the dowel,
drill a hole with a diameter of 6 mm. Screw in the screw and hang the receiver with the suspension eye
on the screw head (see Fig. 5). Press the receiver down slightly to fix it in place and check that it is seated
securely. Any unevenness in the ground must be compensated for by using spacers.
55