Winding A Bobbin; For Your Safety - Kasanova CIH000005 Manuel D'instruction

SEWING MACHINE AND SEWING KIT
and larger needles for heavier fabric.

WINDING A BOBBIN

1. Always remove the bobbin from the bobbin case on the machine before you
wind a new bobbin.
2. Place the thread spool on the thread spindle ...
3. Take an empty bobbin in one hand. Pull the thread down from the thread
spool and thread the loose end through the small hole on the bobbin rim
from the inside.
4. Leaving the loose end on the outside of the bobbin, wind the thread several
turns around the inside of the bobbin.
5. Place the bobbin on the bobbin winder, located on the hand wheel.
6. Make sure that thread is winding onto the bobbin in a counter clockwise
direction. (This would mean the thread should be winding under the bobbin,
not over it).
7. Hold the thread lightly, guiding it gently through your thumb and index finger
and turn the machine ON.
8. When the bobbin is full, turn power switch to the OFF position. lnsert the
bobbin into the bobbin case using the instructions for threading the machi-
ne.
BATTERY WARNING STATEMENT
• Do not mix old and new batteries.
• Do not mix alkaline, standard(carbon-zinc),or rechargeable.

FOR YOUR SAFETY

Always disconnect or remove power supply including batteries when changing
needles or threading machines.
• Never open the main motor case of the machine. The mechanism has been
factory adjusted.
• Always check the threading of the lockstitch before beginning to sew a
seam. lmproper threading or placement of the bobbin will result in damage
to the machine and clothing.
• Do not pull on fabric as you sew. Gently guide the materiai. Pulling could
break the needle and result in damage to the machine.
• Remove batteries when the machine is not in use for long periods, this sa-
ves battery lite and protects the machine. Keep extra batteries on hand so
projects will not be interrupted when batteries need to be replaced.
11